Epson R300 Maintenance tips
Q:
When I print from the Windows XP Picture and Fax Viewer using the Photo Printing Wizard, my prints look too dark. What is wrong?
A:
Some Epson printer drivers produce darker output from the Windows XP Photo Printing Wizard with Service Pack 2 (SP2) when used with their default color settings. We will be updating the drivers to correct this problem and posting them on the Epson Support Website for downloading. The updated driver is available for the Stylus Photo R200. You can download the driver from the Downloads page.
Full information is available from the Epson website here
Epson R200, R210, R300, R310 Counter Reset
Here is how to reset the waste counter for the;
- Press and hold “Stop”, “Maintenance”, and “Power” buttons for about 10 seconds. A message will come on the screen saying counter is reset and to turn the printer off. The R200 and others don’t have a screen so just wait until the 10 seconds is up.
- Turn the printer off, unplug the power cord. Wait about 1 minute and power the printer back up. The counter will be reset. That’s all there is to the reset procedure.
Message:
Service required. Parts inside your printer are at the end of their service life. See your printer’s documentation for details
If the waste pad is actually full and ink is about to overflow, then you need to install a waste container. You can see the waste pad by opening the access panel on the back of the printer.
Changing the waste pad requires almost complete disassembly of the printer, it is a big job. There is an easier way.
Open the access panel on the rear of the printer (remove screw) and look inside carefullly with a flashlight. You will see a tube (down and to your left) coming from the cleaning pump and it will have an open end on it. This is the tube that delivers ink to the waste pad.
Use a piece of coathanger wire or equivalent, and fish out this piece of tube. Bring it to the outside of the printer, thru the access panel.
Find yourself a suitable container (Tupperware or a plastic cup or jar) that is not too tall. Put the tube into this container and secure the tube and container so they won’t come apart or lose connection if the printer is moved.
If you wish you can make a hole or notch in the access panel cover so it can be replaced.
Now the ink will go into this container and not into the waste pad inside the printer. If it gets full, dump it.
